SANY CONCRETE MIXER
The new definition of worthiness and confidence in all tasks
The highly efficient SANY concrete machinery is engineered with top performance, technology, and design. It is powered by the HINO common rail diesel engine with 270 horsepower (SY306C-8) and CUMMINS (SY202C-6), making the mixed cement perfect in ratio and quality. The mixing blade in the model is exclusively designed by SANY. The cement mixer uses Dual Power technology which supports the harmonious operation of both the engine and gear system, helping save 10% more fuel than normal. Apart from that, it was designed with less blind spots to increase the driving vision for the driver. The cement mixer comes equipped with a screen to display the maintenance information and grinder lever so that users may provide full care for the vehicle.
Vehicle weight | 6,000 kg |
---|---|
Total load | 9,900 kg |
Dimension (WxLxH) | 2,300 × 6,950 × 3,200 mm |
Wheelbase length | 3,600 mm |
Ground clearance | 194 mm |
Min.turning radius | 14 m |
Fuel consumption rate | ≤17 L / 100 km |
Engine model | Cummins ISDe140 30 103kW |
---|---|
Piston displacement | 4.5 L |
Highest horsepower | 103 kW / 2,500 rpm |
Highest torque | 450N.m / 1,400 rpm |
Exhaust emission standards | Euro Ⅲ |
Capacity | 2 m3 |
---|---|
Feed Speed | ≥ 3m3/min |
Discharge Speed | ≥ 2m3/min |
Discharge Residual Rate | ≤ 0.95% |
Tank capacity | 300 L |
Reduction gear (STD) | TOP T60 |
Hydraulic pump (STD) | Rexroth A4VTG071 |
Motor (STD) | Rexroth AA2FM80/61W |
Chassis | 4×2 |
Gear model | Fast 6DS50T |
---|---|
Front axle weight | 2.7 t |
Rear axle weight | 6.8 t |
Tyre size | 8.25R16 |
Brake | Front: φ320mm × 100mm / Rear: φ320mm × 130mm |
Air tank size | 2×45 L |
Fuel tank capacity | 100 L |
Hydraulic pump (STD) | Rexroth A4VTG071 |
Motor (STD) | Rexroth AA2FM80/61W |
Chassis | 4×2 |
Vehicle weight | 12,200 kg |
---|---|
Total load | 25,000 kg |
Dimension (WxLxH) | 2,550 × 8,030 × 3,200 mm |
Wheelbase length | 3,025 + 1,350 mm |
Ground clearance | 240 mm |
Min.turning radius | 16 m |
Fuel consumption rate | ≤35 L / 100 km |
Engine model | Hino J08E-VA |
---|---|
Piston displacement | 7.684 L |
Highest horsepower | 202 kW / 2,200 rpm |
Highest torque | 1000 N.m / 1,500 rpm |
Exhaust emission standards | Euro Ⅲ |
Capacity | 6 m3 |
---|---|
Feed Speed | ≥ 8m3/min |
Discharge Speed | ≥ 5m3/min |
Discharge Residual Rate | ≤ 0.5% |
Tank capacity | 550 L |
Reduction gear (STD) | PMP6.0 |
Hydraulic pump (STD) | Rexroth A4VTG071 |
Motor (STD) | Rexroth AA2FM80/61W |
Chassis | 6×4 |
Gear model | Fast 9JS119TA |
---|---|
Front axle weight | 6.5 t |
Rear axle weight | 2 x 13 t |
Tyre size | 11.00R20 |
Brake | Front: φ400mm×150mm / Rear: φ410mm×220mm |
Air tank size | 2×56 L |
Fuel tank capacity | 200 L |
Hydraulic pump (STD) | Rexroth A4VTG071 |
Motor (STD) | Rexroth AA2FM80/61W |
Chassis | 4×2 |